Commercial cleaning rates per square foot: how to set yours
Commercial cleaning rates per square foot are usually quoted as a monthly price divided by the cleanable area, and published ranges put general offices at roughly $0.09 to $0.17 a square foot. Those ranges are a sense check, not a price. Your rate has to come from your own production rate, labor cost, overhead and margin, and it changes with how often the site is cleaned. This article explains what the published numbers measure, then walks through a worked example you can redo with your own inputs, in square feet or square metres.
What a “rate per square foot” actually measures
Ask three cleaning owners for their rate per square foot and you may get three different units. Some mean the monthly contract price divided by the area. Some mean the price of one visit divided by the area. Others mean the price for a one-off job such as a strip and reseal, where square footage is the natural unit. Before you compare your number with anyone else’s, check which one they mean.
The trade association ISSA uses the monthly version: total monthly cost divided by total cleanable square footage. Its example is a building of 100,000 square feet costing $12,000 a month, which gives $0.12 a square foot. Use the same definition in your own quotes so a buyer comparing bids compares like with like.
Published ranges and how far to trust them
Here are the ranges ISSA published in its pricing guide of December 4, 2025. ISSA calls them general guidelines and does not say what data they come from, so treat them as a way to spot a quote that is far off, not as a market survey.
| Facility type | Range per sq ft |
|---|---|
| General office | $0.09 – $0.17 |
| Medical and healthcare | $0.14 – $0.29 |
| Industrial and manufacturing | $0.08 – $0.20 |
| Retail | $0.07 – $0.15 |
| Schools and education | $0.07 – $0.14 |
Two things these ranges leave out matter more than the numbers. First, frequency: a site cleaned five nights a week needs more than twice the labor of one cleaned twice a week, yet both are “an office”. Second, size: a small office has more restrooms, kitchens and bins per square foot than a large open floor, so its rate per square foot is higher. A range that does not state frequency or size cannot tell you whether your quote is right.
Build your rate from your own costs
The method is the one used for any cleaning bid, done in five steps. The cleaning bid article covers the walkthrough and bid sheet in detail; here the focus is on getting to a rate per square foot you can defend.
- Production rate. How many square feet one cleaner covers in an hour for this type of space, timed on your own jobs. ISSA publishes reference times in its “612 Cleaning Times” guide; your own timings are better because they include your equipment and your team.
- Hours per visit. Cleanable area ÷ production rate, plus time for restrooms, kitchens and fixtures you count separately if your rate covers floors only.
- Visits per month. Nights per week × 52 ÷ 12. Five nights a week is about 21.7 visits a month, not 20.
- Loaded labor cost. The hourly wage plus payroll taxes, workers’ compensation, paid time off and any benefits. For context, the US Bureau of Labor Statistics reports a median wage of $17.27 an hour for janitors and building cleaners in May 2024; in the UK, the National Living Wage for workers aged 21 and over is £12.71 an hour from April 1, 2026.
- Supplies, overhead and margin. Consumables and equipment wear, then overhead (insurance, supervision, vehicles, software, admin, the cost of winning work), then the profit margin you need.
Worked example: one office, three frequencies
A 10,000 square foot office, measured as cleanable area. The example cleaner covers 2,500 square feet an hour on this kind of space, so one visit takes 4 hours. The wage is $18 an hour and payroll costs add 25%, for a loaded labor cost of $22.50 an hour. Supplies and equipment are set at 7% of labor, overhead at 15% of labor, and the target margin is 15% of the price (price = cost ÷ 0.85).
| 2 nights a week | 3 nights a week | 5 nights a week | |
|---|---|---|---|
| Visits a month | 8.7 | 13 | 21.7 |
| Labor hours a month | 34.7 | 52 | 86.7 |
| Labor cost | $780 | $1,170 | $1,950 |
| Supplies and equipment (7%) | $55 | $82 | $137 |
| Overhead (15% of labor) | $117 | $176 | $293 |
| Total cost | $952 | $1,428 | $2,380 |
| Monthly price at 15% margin | $1,120 | $1,680 | $2,800 |
| Rate per sq ft per month | $0.112 | $0.168 | $0.280 |
| Rate per sq ft per visit | $0.013 | $0.013 | $0.013 |
Read the last two rows together. The rate per visit stays the same, because it is the same work each night. The monthly rate per square foot more than doubles between two and five nights. The five-night price lands above ISSA’s office range, which is what you would expect for a small building cleaned every weeknight; it does not mean the price is wrong. If a buyer quotes you a “going rate” per square foot, ask what frequency it assumes.
In the UK, run the same sum in square metres: 10,000 square feet is about 929 m² (1 m² = 10.764 sq ft), and a production rate of 2,500 sq ft an hour is about 232 m² an hour. Use your own UK wage and on-costs, including employer National Insurance and pension contributions.
When a per-square-foot price is the wrong tool
Square footage drives floor work, but many sites are priced by something else. Use a per-square-foot rate as the base and add separate lines for what does not scale with area.
- Restrooms and kitchens. Count fixtures (toilets, urinals, basins, appliances) and time them separately. A small office with four restrooms takes longer than its floor area suggests.
- Medical and food areas. Disinfection steps, colour-coded equipment and logs add time per room, not per square foot.
- Periodic work. Carpet extraction, strip and reseal, high dusting and windows are priced per job, per square foot of that surface, and shown as their own lines.
- Day porter or restroom checks. Priced by the hour, since the work depends on occupancy, not area.
- Very small sites. Below a few thousand square feet, travel, setup and a minimum visit length matter more than area. Set a minimum monthly price.
How to quote it to the client
Buyers compare a monthly number, so give them one. Show the rate per square foot only if they ask for it, or if the tender form requires it, and state the frequency next to it.
Pricing section for a cleaning proposal
Scope: nightly cleaning of [cleanable area] sq ft, [nights] nights a week (Monday to Friday), as listed in the attached task schedule. Monthly price: [amount] per month, invoiced monthly. This is [rate] per square foot per month at [nights] visits a week. Included: all labor, supervision, cleaning chemicals and equipment. Not included: paper, soap and bin liners (supplied at cost, or by you), carpet extraction, floor strip and reseal, window cleaning. Prices for these are listed separately below. The price is fixed for [12] months. Changes to the area, frequency or tasks are quoted in writing before work starts.
Put that section into a full proposal; the commercial cleaning proposal template gives you the other sections, and the step-by-step guide to getting commercial cleaning contracts covers how to find and approach the buyers in the first place.
Check your rate after the first month
Your estimate is only as good as your production rate. For the first month on a new site, log the real hours per visit. If they are more than about 10% over your estimate, find out why (extra rooms, heavier traffic, a slow cleaner still learning the site) and either fix the cause or raise the issue with the client before the habit sets in.
Keep a simple record per site: area, frequency, estimated hours, real hours, monthly price, resulting rate per square foot. After a dozen sites you will have rates for your own market that are far more useful than any published range.
You also need enough buildings to quote. The LeadsIt system finds offices, clinics, gyms and other sites by business type and city, with the phone numbers and emails each business publishes on its own website, so you can build a list of buildings to approach in one area. The page for cleaning companies shows how that fits a cleaning sales routine.
Frequently asked questions
What is the average commercial cleaning rate per square foot?
ISSA’s December 2025 guide puts general offices at $0.09 to $0.17 per square foot per month, without stating its data source or a cleaning frequency. Use it as a sense check and build your own rate from your costs.
Is the rate per square foot per month or per visit?
It depends who is quoting. The common definition, used by ISSA, is the monthly price divided by the cleanable area. Always state the frequency next to the rate so buyers compare like with like.
How many square feet can a cleaner clean in an hour?
It depends on the type of space, the equipment and the tasks. Time your own team on real jobs; ISSA’s 612 Cleaning Times guide gives reference times you can start from.
How do I price commercial cleaning per square metre in the UK?
Use the same method in square metres: your production rate in m² an hour, your loaded labor cost including employer National Insurance and pension, then supplies, overhead and margin. 1 m² equals 10.764 sq ft.